International
International en
Europe
Austria de
Belarus en
Belgium en fr
Czech Republic en
Finland en
France fr en
Germany de
Ireland en
Lithuania en
Netherlands en
Norway en
Poland pl en
Romania en
Slovakia en
Slovenia en
Spain en
Sweden en
Switzerland de fr
Ukraine en
Home Technology
Become a conductor

Our BRUNNER home technology is practical, easy to use and full of benefits for the user. See what the abbreviations EAS, EOS and USA means and how you will enjoy using these "little helpers".

Service
Secure guarantee extension now

Register your BRUNNER product within the first three months and you will receive a further warranty extension in addition to the usual BRUNNER warranties.

About
Service
Blog
Menu
Close

Radiant heat vs. convection heat

A warm room is a place of well-being. However, the positive feeling is not only related to the temperature, but also to the room climate. A distinction is made between convection and radiation heat. Not all heat is the same, because heating influences both the room temperature and the room climate. A warm room does not automatically have to be perceived as pleasant. In principle, there are two different types of heat transfer:

Convection heat

When energy is transferred from one place to another, it is called convection heat. In this process, the air absorbs heat and brings it to another place by convection (from the Latin convehere: to carry, to take along). The energy carrier is therefore air and the principle is: air heats air by convection.

Radiant heat

Radiant heat is infrared radiation. When this infrared radiation hits objects, it heats them. Objects then also radiate the heat again, so you are in a pleasant radiant heat field.

Convection heat dominates in the hot-air stove 

A hot-air stove primarily gives off convection heat. If it is equipped with a recirculation and supply air grate, this increases the heat efficiency because the air flows in at the bottom, past the heated reheating surfaces and out through the upper supply air grate where it is heated up particularly quickly. The heat therefore reaches the room quickly, but is not as long-lasting as the radiant heat of a storage heater. In addition, dust is stirred up by air movements in the room, which can be unpleasant not only for allergy sufferers.

Storage heaters provide a lot of radiant heat

Conventional masonry and storage heaters produce only a minimal proportion of convection heat, but they produce a high proportion of pleasant radiant heat. The room is heated evenly, there are no cold floor areas. Because the heat is transmitted directly to the entire room and radiated to people, it feels more intense. This saves heating costs because the room temperature can be set lower. A storage heater has a longer heat-up time, but stays warm longer.

Specialist tip

Which type of heat you prefer is a personal decision. If it has to happen quickly, the hot-air stove is advisable. If you can give a storage heater time and prefer to get some heat for longer, the latter is the better choice.

 

 

 

Klaus Leihkamm, Head of craftsmen consultation & customer service

Blog

These articles might also interest you

Further articles on the topic of heating with renewable energies can be found here in our blog posts.

About Brunner
29. Lúnasa 2018
Who is BRUNNER?
Hinter dem Namen BRUNNER steckt ein Unternehmen mit Leidenschaft für Ofenbau, Kaminbau und Heiztech ...
Order a brochure
You are interested in our products? We send you further documentation.
Order now