Kit system tiled stove
A sophisticated solution with a system
Attractive thermal concrete in system construction
BRUNNER BSO system stoves are offered as a kit to keep installation time short and costs low. Nevertheless, there is a choice of different claddings - from plain exposed concrete to fancy plaster structures or tasteful ceramic surfaces. The BSO is also available as a boiler module.
For primarily heat
A kit system tiled stove is installed when priority heat is desired and it should be available for hours after the stove burn-off. This is why kit system tiled stoves are also called "slow-reaction furnaces" because of their heating capacity.
"Slow-reaction furnace" principle
Tiled stove heating insert with a storage on top with heating gas flow
As with a "real" storage heater, the energy of the flue gases is absorbed as it flows through the storage and released over the surface with a time delay. The room receives the rapid heat during combustion via the firebox radiation through the large viewing glass. This type of heating effect has become known from tiled stoves.
"Slow-reaction furnace" principle
Tiled stove heating insert with large lateral storage
The kit system tiled stove with lateral storage works in exactly the same way. It also has the familiar tiled stove effect and stores the heat for a long time with considerably more storage. This type of arrangement is particularly suitable for benches on which you can warm up comfortably on cold days.
Easy to operate
Simple and uncomplicated
Manually operated or automated
The combustion air can be controlled manually with just one operating element (lever). Effortless and easy to understand. The symbols on the glass provide additional support.
Of course, the white display (EAS) shows that it can also be operated automatically. The most convenient version is the combination with an electronic combustion control (EAS). All you have to do is light the stove or add fuel, the control system takes care of everything else. High efficiency is the result, because the EAS servomotor never forgets to readjust and always stops the combustion air supply at the end of the burn-off. This is particularly convenient if the stove cannot be operated any further after its kindling, either because you go to bed or you leave the house.
Thermal concrete look
Modern fireplace cover
Puristic, stylish and elegant - the fireplace body in its simplest form and appearance. Precisely fitting thermal concrete elements, cast and assembled with shadow gap. Here, perfection lies in the imperfect. The concrete surface has edges and unevenness, which is precisely why it appears so clear and unobtrusive. It is highly advisable to seal the thermal concrete elements with carnauba wax after assembly. This is absolutely recommended in order to permanently prevent unwanted stains. Because once a hand or shoulder with natural skin grease has leaned against the cold fireplace cover, the dark stain is almost impossible to get rid of. Other liquids are also absorbed by the concrete surface and permanently change its appearance.
A real storage heater in a practical system format. As an inexpensive alternative to the classic tiled stove, a BSO is equipped with industrially prefabricated stove cladding made of thermal concrete. The effect remains the same: Long-lasting warmth that supplies the living space with pleasant radiant heat for hours. Simple and practical.
Although a kit system tiled stove does not offer the customised features of a handcrafted system. On the other hand, its industrially prefabricated components make it much quicker and cheaper to install. The kit is delivered complete and only needs to be assembled by the craftsman. In the process, the height of the thermal concrete cladding parts can be additionally extended.
Although the BSO is a classic kit system tiled stove, you don't have to do without the usual BRUNNER quality. Because inside there is a genuine tiled stove insert, with all its advantages. Despite the lower costs, there are no compromises in the workmanship and materials, and heating is simply fun.
Although the shape of the thermal concrete components of the BSO cannot be customised, you can still adapt it to the design and colour scheme of your living space. Using special plasters and colours, it is possible to give your BRUNNER storage heater that certain something extra. In this way, a practical, quickly assembled heating appliance becomes a design system for every living room. In addition, the BSO is available in 4 different versions, including the option of designing it as a water-bearing stove.
Today's world of wood fires increasingly consists of large glazing and a lot of visual fire atmosphere. Yet the heating itself often takes second place. For all customers who appreciate the warmth aspect of a wood fire, there is only one address: BRUNNER. Because in addition to high-quality fireplaces, wood stoves and kit system fireplaces, it is above all our tiled stoves and kit system masonry heaters that have enjoyed the greatest popularity for decades. You have this experience also in the kit system tiled stoves by BRUNNER. Thanks to innovations and constant further development, you get what is probably the best system directly from the specialist. A good deal.
Consult your furnace builder to find the right heating insert for your home.
Also use our social media channels to get inspired.
