International
International en
Europe
Austria de
Belarus en
Belgium en fr
Czech Republic en
Finland en
France fr en
Germany de
Ireland en
Lithuania en
Netherlands en
Norway en
Poland pl en
Romania en
Slovakia en
Slovenia en
Spain en
Sweden en
Switzerland de fr
Ukraine en
Boilers & Heat Pumps
SWITCH NOW TO SUSTAINABLE HEATING

If you wish to switch to a lower-emission heating system, there are several options for generating heat with renewable energy for the benefit of the environment: pellet, log or heat pump heating.

Home Technology
Become a conductor

Our BRUNNER home technology is practical, easy to use and full of benefits for the user. See what the abbreviations EAS, EOS and USA means and how you will enjoy using these "little helpers".

Service
Secure guarantee extension now

Register your BRUNNER product within the first three months and you will receive a further warranty extension in addition to the usual BRUNNER warranties.

About
Service
Blog
Menu
Close

The further development of DF33

The optimised turning fireplace

08.06.2020

from every perspective, wherever one wants it. The DF 33 turning fireplace from premium manufacturer BRUNNER based in Lower Bavaria provides a fire atmosphere from more than just one perspective and optionally with heat storage.

BRUNNER turning fireplace inserts are made of durable, high-quality cast iron in a steel frame profile. This is visually appealing and guarantees even, long-lasting and cosy heat distribution. Ideally, the turning fireplace is combined with an attached or adjacent thermal mass unit, i.e. as a tiled stove. BRUNNER DF 33 turning fireplace is mounted in a C-profile frame and allows the stove craftsman builder to develop and implement own designs. The cube, which is supported downwards and upwards and has an edge length of 50 centimetres, can be turned to all sides in the desired direction. The turning movement is carried out mechanically by hand with an operating pin or it is motorised by remote control - and has now become even lighter and sturdier.

Consistent further development of the turning fireplace

Not that the BRUNNER DF 33 turning fireplace was noisy or unstable before. But it is a heater and is also used as such. Based on the experience of the last few years, the upper pivot bearing has now been designed to be even more resilient: even more leeway can be taken into account in terms of thermal and mechanical load. While the lower ball bearing is installed as an axial bearing in the cooler, lower axis section as a mount; absorbs the entire static load of the "turning cube" (up to 16 tonnes) and is easy to move, BRUNNER uses a more suitable concept for the upper mount. Tests have shown that: Under thermal stress, an axis guide in the burnout area with two sealing cords, which are installed in a circumferential bead and thus double-sealed, is significantly sturdier and much quieter than the variant with ball bearings. A further advantage: Due to the flanged design, the axis can be removed downwards through the combustion chamber, which means that assembly and disassembly of the turning cube by the stove builder is extremely easy and flexible.

Typically BRUNNER

The numerous practical and well thought-out details that are standard for the premium manufacturer from Lower Bavaria have proven their worth in the DF 33 turning fireplace. First and foremost the sealing surface, which is ground flat with the body and thus permanently tight. A sealing cord for the firebox door is therefore superfluous, the self-locking latch with integrated balancer always keeps the door firmly and tightly against the unit body.

Press Contact
Mrs Michaela Ertl
Zellhuber Ring 17-18
84307 Eggenfelden
+49 (0) 8721 771-142
ertl@brunner.de
More Articles
BRUNNER BKH green in even more formats
BRUNNER BKH green in even more formats
BRUNNER BKH green in even more formats
Downloads
Description Preview Filesize
brunner_pressemeldung_drehfeuer_df-33_weiterentwicklung_08-06-2020.pdf
PDF
625,45 KB
brunner_drehfeuer_df-33_weiterentwicklung_illustration_schnitt.jpg
318,15 KB
brunner_drehfeuer_df-33_weiterentwicklung_details_schnitt-EN.jpg
1,41 MB
PR images, poster or advertisement templates, logos and videos from Ulrich Brunner GmbH may be used by the media and the press under certain conditions.

1. These must be provided with the source reference "BRUNNER" or "BRUNNER GmbH".
2. If the name of the stove builder involved or another authorized third party appears from the file name, this must also be stated (e.g. photo: BRUNNER GmbH/Ofenbau Mustermann).
3. Use on third-party platforms such as social networks or directories is only permitted if there is a link to www.brunner.de and the obligations under Sections 1 and 2 are observed.
4. All PR images, poster or advertisement templates, logos and videos in this area may only be used for reporting on the Brunner company or its products. Use outside of this context, in particular to illustrate or advertise one of the company's own services, is prohibited.

Violations will be legally punished. I hereby agree to the terms of use and agree to them.
Order a brochure
You are interested in our products? We send you further documentation.
Order now